Steel and aluminum production requirements aluminum towline towline width can be customized according to user needs specifically, winding radius from 800-50, and when the cable, pipe demand often disassembly, repair, perhaps fitting scales larger than the pore size of the support plate cavity Hou. Be able to use the support plate and is usually used to separate style aluminum towline, need carry large cable, tube bearing at the right time, probably high strength support plate and optional block style aluminum towline, pin to use steel or manganese steel carburizing, which will enhance the wear resistance and hardness, and then add the use of steel and aluminum towline life and strength, the thickness of the support plate to use standardized pultruded aluminum, installation cable, pipe standard model is very much after midnight, may selection usual support plate and frame type of steel and aluminum towline, the support piece will need to carburizing, be sure to use the national standard steel plate, some manufacturers use non-standard steel, towline piece next difference is too large (thickness not). Such towline strength decreased significantly, the use of life can not be guaranteed, slightly longer appeared to discover. Chain plate height, that is the height of the support plate is determined by the maximum diameter of the cable the resolution, the maximum limit of the machine work, such as the towline beyond the width of 300mm, the length of towline exceed 4m, for stability reasons, should consider One selection criteria to increase the towline. Website www.ysjrjcfj.com