TLG a variety of different support plate the TLG aluminum towline towline type needs to meet different requirements, it can be fixed aluminum support plate width or up to 1200mm in maximum speed and travel speed, drag chain separated internally flawless, and to ensure that the cable best protection. Every two chain plate to provide a support plate. Each section are required to support plate, in order to provide 10A/20A/30A/40A/50A instead 10B/20B/30B/40B/50B. I.e. TLG20A/200 × 2100/200 "h" or TLG20B/200 × 2100/200 "h." Silver Star (Silber Star) aluminum shield towline order Model 325/525/625. Further, please see the following figure "Silver Star guard. I.e. TLG325/200 × 2100/200 "h." TLG type steel towline can carry more number of heavy cables and tubing, free mount (allowing not support round) length, the support plate according to customer need to produce, for machine tools, such as mobile machinery. The bending radius of 50-600mm, the height of the chain plate 35-150mm, can be arbitrarily chosen. TLG type steel towline its use to travel up to 32 meters. Applies to all transmission mode. Can easily be lengthened and shortened. Further, by changing the pin obtained by changing the bending radius. Towline support plate width from 150mm to 600mm, the amount of spacing between holes 5 mm. The height of the chain plate, which is the height of the support plate is determined by the maximum diameter of the cable, to maximize the operation of the machine, such as the width of the towline over 300mm, the length of the towline is more than 4m stability reasons, should be considered when selecting increase Specifications 1 towline. Bending radius according to the maximum diameter of the cable select and should reach 10 times the diameter of the cable. Bending radius according to the form to select the 50-600mm, stroke the corresponding select a smaller radius. Towline length = 1/2 +4 trip bending radius, this only applies when the fixed links is at the mid-point of the trip. The towline fixed can be selected based on the location of the machine. Fixed angle iron can be placed on the outer periphery or inner periphery in the towline or external the general coupling portion in a towline, elite mounds Contact Sun Shiqiang phone 15690271367 WebSite www.jrjcfj.com