TLG type steel towline can carry more number of heavy cables and tubing, free mount (allowing not support round) length, the support plate according to customer need to produce, for machine tools, such as mobile machinery. The bending radius of 50-600mm, the height of the chain plate 35-150mm, can be arbitrarily chosen. TLG type steel towline its use to travel up to 32 meters. Applies to all transmission mode. Can easily be lengthened and shortened. Further, by changing the pin obtained by changing the bending radius. Towline support plate width from 150mm to 600mm, the amount of spacing between holes 5 mm. The height of the chain plate, which is the height of the support plate is determined by the maximum diameter of the cable, to maximize the operation of the machine, such as the width of the towline over 300mm, the length of the towline is more than 4m stability reasons, should be considered when selecting increase Specifications 1 towline. Bending radius according to the maximum diameter of the cable select and should reach 10 times the diameter of the cable. Bending radius according to the form to select the 50-600mm, stroke the corresponding select a smaller radius. Towline length = 1/2 +4 trip bending radius, this only applies when the fixed links is at the mid-point of the trip. The towline fixed can be selected based on the location of the machine. Fixed angle steel towline can be placed on the outer periphery or the inner periphery or outside of the the general coupling portion in a towline, outwardly week. Mr. Sun Mobile 15690271367 Website www.ysjrjcfj.com